LS Turbo Cross-Over Tube 8514HKR
LS Turbo Cross-Over Tube 8514HKR
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Overview
Holley's new LS Turbo Exhaust Manifolds are made from cast iron and allow a simpler and easier way to add a turbo to your muscle car. These manifolds are made from High-Silicon-Moly ductile iron and are much more durable & retain more heat than fabricated headers. The manifolds kits include v-band clamps & flanges, heater hose heat shield, and header bolts. A turbo cross-over tube is used to connect the two manifolds (sold separately). Choose the cross-over tube based on the transmission (and bell-housing) for optimal fit and ground clearance. The cross-over tubes are made from 16-gauge, mandrel bent 304 stainless steel and v-band flanges welded on for an easy bolt-on fit. A universal cross-over component kit is also available for custom applications that need something a little different (requires fabrication & welding). These parts work with most common LS swap parts (i.e. motor mounts, swap oil pan, and accessory drive systems) & provide the basic building blocks needed to complete a custom turbo system for your GM LS engine
Features
- Choose Cross-Over Tube Based on Type of Transmission & Bell-Housing
- Cross-Over Tubes Are 16 Gauge, Mandrel Bent 304 Stainless Steel & Include V-Band Flanges
- Pre-Made Cross-Over Tube Provide Optimal Fit & Ground Clearance
Application
- Does not fit 2004-'06 GTO starter & bellhousing. Requires removal or relocation of OE A/C Compressor.
Specs
| Brand | Hooker |
| Collector Diameter | 2-1/4 inch |
| Emission Code | 4 |
| Header Finish | Natural |
| Header Style | Turbo |
| Product Type | Manifold |
| System Type | Cross-over |
| Tube Material | 304 Stainless Steel |
| Warning | California Proposition 65 |

Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.