Holley Hooker BlackHeart LS/LT Engine Mount Brackets-G-Body - BHS5179
Holley Hooker BlackHeart LS/LT Engine Mount Brackets-G-Body - BHS5179
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
The entire Holley swap system (brackets, mounts, oil pans, accessory drives, etc.) is designed to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle and compatibility of these components with other popular aftermarket components. The experts at Hooker BlackHeart have taken away the guesswork of where to position your engine swap and we've followed up on our popular GM G-Body LS line with a new version that allows you to choose LS or LT engines by utilizing 4th Gen F-Body clamshell engine mounts. To complete the engine mounting be sure to follow these steps: 1). Choose the proper clamshell for your engine: Gen III/IV (LS) - 71221018HKR Gen V (LT) - 71221019HKR 2). Add the thru bolt kit: GM LS/LT/Gen III Hemi - 71223015HKR 3). Choose the polyurethane insert in the color you prefer: Black - 71221016HKR Red - 71221017HKR For the transmission, this kit is designed to be used with the same G-Body transmission crossmember already in production (12644HKR-1) for a trouble-free installation and optimized driveline angles. This system is compatible with almost any popular GM transmission, even modern 6-speed, 8-speed, and 10-speed applications. An adapter kit may be necessary for applications that were NOT equipped with a 200-4R transmission from the factory - Part # 12647HKR. 12644HKR-1 - Transmission Crossmember (no additional adapter needed for TH400/200R4/T-56/Magnum) 12655HKR - 4L60/65/70/75 Transmission Adapter - use with 12644HKR-1 12656HKR - 4L80/85 Transmission Adapter - use with 12644HKR-1 BHS5181 - 10L80/10L90 Car Transmission Adapter - must be used with both BHS5182 and 12644HKR-1 BHS5182 - 6L80/90, 8L45/80/90, 10L80/90 Transmission Adapter - use with 12644HKR-1 BHS5183 - Tremec TKX 5-Speed Transmission Adapter - use with 12644HKR-1 *For installing a 10-speed GM car transmission, both BHS5181 and BHS5182 will be used together to achieve the proper spacing and alignment.
Features:
- When coupled with the Hooker BlackHeart transmission crossmembers 12644HKR-1, these mounting brackets locate the engine in the same nominal position (fore-aft, height, offset, etc.) as the original engine
- Easily switch between LS and LT engines through a simple change of the necessary 4th Gen F-body clamshell engine mounts: 71221018HKR for LS and 71221019HKR for LT. Polyurethane inserts are the same for LS or LT.
- Provides compatibility with many accessory drives: Holley Corvette style, Holley F-body style, OE Corvette, OE F-Body, OE GTO, OE Vortec Truck
- Works with Hooker BlackHeart 8501HKR, 8502HKR, and 8503HKR (LS) and BHS516 and BHS3116 (LT) exhaust manifolds
- 100% quality hand-welded construction for strength, longevity, and good looks
- Durable powder coated finish and all hardware included
- Allows the use of Holley LS or LT oil pans: 302-2, 302-3, 302-20, or 302-21
Specs:
Application | 78-88 A/G-Body |
---|---|
Brand | Hooker BlackHeart |
Color | Black |
Emission Code | 5 |
Engine | GM Gen III/IV (LS) |
Finish | Zinc |
Material | Steel |
Product Type | Engine Mounts |
Transmission | 10L80 |
Transmission | 200R4 |
Transmission | 4L60E |
Transmission | 4L65E |
Transmission | 4L70E |
Transmission | 4L75E |
Transmission | 4L80E |
Transmission | 4L85E |
Transmission | 6L80E |
Transmission | 6L90E |
Transmission | 8L45E |
Transmission | 8L90E |
Transmission | T56 GM |
Transmission | T56 Magnum GM |
Transmission | TH350 |
Transmission | TH400 |
Type of Component | Engine Mount Bracket |




Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.