Holley GEN III HEMI Hi-Ram EFI Manifold BLACK - 300-651BK
Holley GEN III HEMI Hi-Ram EFI Manifold BLACK - 300-651BK
Regular price
$1,549.95 USD
Regular price
Sale price
$1,549.95 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.
Features:
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Billet Oil Fill Cap – Attractive Low Profile Design
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Overall Height: 11.59”
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Features:
- 2008 - 2020 Dodge Challenger
- 2006 - 2020 Dodge Charger
- 2009 - 2020 Dodge Durango
- 2006 - 2008 Dodge Magnum
- 2009 - 2010 Dodge Ram 1500
- 2009 - 2010 Dodge Ram 2500
- 2009 Dodge Ram 3500
- 2009 - 2010 Dodge Ram 4000
- 2011 - 2020 Ram 1500
- 2019 - 2020 Ram 1500 Classic
- 2010 - 2020 Ram 2500
- 2011 - 2020 Ram 3500
- 2011 - 2020 Ram 4000
- 2014 - 2019 Ram 4500
- 2014 - 2020 Ram 5500
- 2006 - 2020 Jeep Grand Cherokee
- 2009 - 2010 Jeep Commander
- 2005 - 2020 Chrysler 300
- 2009 Chrysler Aspen
Specs
| Brand | Holley EFI |
|---|---|
| Color | Black |
| Construction | Cast |
| Emission Code | 3 |
| Engine | Gen III Hemi |
| Finish | Black |
| Flange Style | EFI |
| Front Height | 11.59 inch |
| Fuel System Type | EFI |
| Injector Style Provision | EV-1 |
| Gen III Hemi | |
| Inlet Size | 105mm |
| Manifold Type | Hi-Ram |
| Material | Aluminum |
| Port Size | 1.70" x 1.88" |
| Product Type | Intake Manifold |
| Rear Height | 10.35 inch |
| RPM Power Band | 1500-7000 |
| Runner Length | 6.65 inch |
| Style | EFI |
| Throttle Bore | 105mm |
| Type of Component | Intake Manifold |
| Vacuum Ports | (2) 3/8" NPT & (1) 1/4" NPT |
| Warranty | Limited 90 Day |
| Part Number | 300-651BK |
Policies and FAQs
Return Policy
We accept returns on products within 30 days of delivery. Return shipping is the responsibility of the buyer unless we, the seller, are at fault.
Fault reasons include but are not limited to:
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
The Buyer will not be refunded outbound shipping unless the Seller (Car Part People) is at fault.
In cases where the Buyer purchases and ships the return please note that if the Shipper (ex. USPS, FedEx, UPS, etc.) loses the return we will not be able to offer a refund as the Buyer must contact the Shipper and make a claim.
All products must be returned in original condition, meaning that the product must not be damaged, installed, or missing pieces/parts. If the product is not in original condition a deduction will be issued of up to 50% of the purchase price of the product.
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
When we, the seller, are at fault, please Contact Us for a return label, products returned with a shipping label not provided by the seller will not be refunded to the buyer. Please also note that our return labels are issued with the dimensions and weight of the original shipment, if the product is being returned in any box/package besides the original please contact us with the dimensions and weight.
Returns must be sent to this address:
Car Part People
218 S Lyman St.
Wadsworth, OH 44281
Products returned directly to a manufacturer or the incorrect address may be issued a deduction or denied a refund entirely.
If a product was delivered outside the 30 day return window or is no longer in original condition please contact us as we may be able to issue a refund in store credit and/or with a deduction. If this is the case please Contact Us as these situations are handled on a case by case basis.
If there are any questions, concerns, or doubts about return eligibility please Contact Us and we would be more than happy to assist you.
This policy and page were last updated: July 14th 2023
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.