Fits 1998-2002 Chevrolet Camaro Holley Pump Module System - Twin 450 Lph 12-365
Fits 1998-2002 Chevrolet Camaro Holley Pump Module System - Twin 450 Lph 12-365
Regular price
$723.95 USD
Regular price
Sale price
$723.95 USD
Unit price
per
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
Fits 1998-2002 Camaro / Firebird - Twin 450 LPH Pump Module
If you are looking to make some serious power with your 1998-2002 4th Gen F-body, the Holley modules feature billet pump flanges that connect to either single or dual 340 or 450 LPH pumps. All four of these options are compatible with gasoline and E85 and come pre-installed with new level and tank pressure sensors as well as provisions to connect to the factory EVAP system for EPA compliance.
NOTES: Drive the vehicle until the level in the tank is at or below 1/8 of a tank. To make tank removal and reinstall as easy as possible, the lower the fuel level the better.
Features:
- Anodized and laser-etched billet 6061-T6 flange with 6AN ORB ports for feed, return, and vent
- All SKUs compatible with Gasoline AND E85
- Comes pre-installed with new pre-calibrated fuel level (33 ? 240 ?) and tank pressure sensors
- Includes new gasket to complete installation
- A 3 x 11-inch HydraMat is included for each pump
- Fits factory plastic tank used in LS1 98-02 Camaro / Firebird or an earlier 4th Gen F-body with fuel tank upgrade
- Fittings included allowing connection to the factory 3/8 quick connect feed and return lines
- Flanges have been designed to be compatible with feed and return line sizes up to -8AN
- Step-down butt connectors included to wire level sensor
- Can be connected to factory EVAP system (w/ use of 12-874 and 935056ERL - sold separately)
- Kit includes vehicle pigtail harness - All connectors used are DTM style
Specs:
| Average Current Draw | 34Ampere |
|---|---|
| Average Flow Rating | 900Liters per Hour |
| Brand | Holley |
| Connector Color | Gray |
| Connector Gender | Female |
| Connector Quantity | 1 |
| Emission Code | 5 |
| Finish | Anodized Black |
| Free Flow GPH | 236 |
| Free Flow LPH | 900 |
| Fuel Filter Included | Yes |
| Fuel Sending Unit Included | Yes |
| Fuel System | EFI |
| Fuel Tank Pressure Sensor Included | Yes |
| Fuel Type | Gasoline/E85 Compatible |
| Gasket Or Seal Included | Yes |
| Gasket Or Seal Material | Rubber |
| Grade Type | Performance |
| Height | Standard |
| Housing Material | Aluminum |
| In Tank or External | In Tank |
| Inlet Quantity | One |
| Inlet Size | 6 AN ORB |
| Inlet Type | 6 AN ORB |
| Internal Or External Strainer | External |
| Lock Ring Included | No |
| Material | Billet Alluminum 6061-T6 |
| Maximum Pressure | 60Pounds per Square Inch |
| Mounting Hardware Included | Yes |
| Negative Ground | Yes |
| Outlet Quantity | One |
| Outlet Size | 6 AN ORB |
| Outlet Type | 6 AN ORB |
| Product Type | Fuel Pump Module |
| Pump Type | Electric |
| Regulator Included | No |
| Resistance Ohms Empty | 33Ohm |
| Resistance Ohms Full | 240Ohm |
| Single Or Dual Pump | Dual |
| Universal Or Specific Fit | Specific |
| Voltage | 12Volts DC |
| Warranty | Limited 90 Day |
| Wire Quantity | 6 |
Application:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1998-2002 | Chevrolet | Camaro | Base |
| 1998-2002 | Chevrolet | Camaro | Z28 |
| 1998-2002 | Chevrolet | Camaro | Z28 SS |
| 1998-2002 | Pontiac | Firebird | Base |
| 1998-2002 | Pontiac | Firebird | Formula |
| 1998-2002 | Pontiac | Firebird | Trans Am |
Policies and FAQs
Return Policy
We accept returns on products within 30 days of delivery. Return shipping is the responsibility of the buyer unless we, the seller, are at fault.
Fault reasons include but are not limited to:
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
The Buyer will not be refunded outbound shipping unless the Seller (Car Part People) is at fault.
In cases where the Buyer purchases and ships the return please note that if the Shipper (ex. USPS, FedEx, UPS, etc.) loses the return we will not be able to offer a refund as the Buyer must contact the Shipper and make a claim.
All products must be returned in original condition, meaning that the product must not be damaged, installed, or missing pieces/parts. If the product is not in original condition a deduction will be issued of up to 50% of the purchase price of the product.
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
When we, the seller, are at fault, please Contact Us for a return label, products returned with a shipping label not provided by the seller will not be refunded to the buyer. Please also note that our return labels are issued with the dimensions and weight of the original shipment, if the product is being returned in any box/package besides the original please contact us with the dimensions and weight.
Returns must be sent to this address:
Car Part People
218 S Lyman St.
Wadsworth, OH 44281
Products returned directly to a manufacturer or the incorrect address may be issued a deduction or denied a refund entirely.
If a product was delivered outside the 30 day return window or is no longer in original condition please contact us as we may be able to issue a refund in store credit and/or with a deduction. If this is the case please Contact Us as these situations are handled on a case by case basis.
If there are any questions, concerns, or doubts about return eligibility please Contact Us and we would be more than happy to assist you.
This policy and page were last updated: July 14th 2023
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.