Fits 1966-1970 B-Body Mopar, NAG1 or 8HP70 Transmission Crossmember Hoop BHS539
Fits 1966-1970 B-Body Mopar, NAG1 or 8HP70 Transmission Crossmember Hoop BHS539
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
The Hooker Blackheart transmission crossmember hoop is part of the most comprehensive line of Gen III Hemi swap components available for the Mopar B-Body. The BHS539 Crossmember Hoop allows the installation of the popular, NAG1 5-speed or 8HP70 8-speed automatic transmission when used with the corresponding adaptor plate (sold separately). The BHS539 Transmission Crossmember Hoop replaces the very narrow factory Hoop on the original B-Body upper transmission crossmember allowing adequate clearance for drive shaft coupler and Speed sensor tone rings. The BHS539 transmission Crossmember Hoop is specifically designed to replace the factory hoop and when used in combination with the BHS532 transmission crossmember will provide a bolt in clearance solution with OE (Original Equipment) strength and durability with no need for any fabrication or welding.
Features:
- Engineered Transmission Mount System Works together with Hooker Blackheart Engine Mounting Brackets, Transmission Crossmember, Long Tube Headers, and Exhaust Systems for an Easy Trouble Free Gen III Hemi Engine Swap in the 1966-1970 Mopar B-Body
- Provides the Necessary Clearance Through the Upper Transmission Crossmember for the Drive Shaft Coupler and Speed Sensor Ring when Installing the NAG1 or 8HP70 Transmission
- 1/2? Steel Upper Hoop Provides the Necessary Structural Integrity When Used in Combination with the BHS532 transmission Crossmember (no Welding Required)
- No Cutting of the Transmission Tunnel Required
- Accommodates Popular NAG1 or 8HP70 Transmission (Requires Transmission Specific Adaptor plate)
- Uses the Factory Mounting Holes ? For Easy Installation
- Black Coated for Great Looks and Durability
- Heavy Duty 3/16? and 1/2? Steel Construction for Strength and Durability
- Includes Mounting Bolts & Instructions
Specs:
Application | 1966-1970 Mopar B-Body |
---|---|
Brand | Hooker BlackHeart |
Color | Black |
Emission Code | 6 |
Finish | Black Paint |
Material | Steel |
Motor Type | Chrysler Gen III Hemi |
Product Type | Transmission Crossmember Support |
Transmission | 8HP70 |
Transmission | NAG1 |
Type of Component | Transmission Crossmember |
Application:
Year | Make | Model | Submodel |
---|---|---|---|
1969-1970 | Dodge | Charger | 500 |
1966-1970 | Dodge | Charger | Base |
1967-1970 | Dodge | Charger | R/T |
1966-1970 | Dodge | Coronet | 440 |
1966-1970 | Dodge | Coronet | 500 |
1966-1970 | Dodge | Coronet | Base |
1966-1970 | Dodge | Coronet | Deluxe |
1967-1970 | Dodge | Coronet | R/T |
1968-1970 | Dodge | Coronet | Super Bee |
1966-1970 | Plymouth | Belvedere | Base |
1968-1970 | Plymouth | Belvedere | Satellite |
1967-1970 | Plymouth | GTX | Base |
1968-1970 | Plymouth | Road Runner | Base |
1966-1970 | Plymouth | Satellite | Base |
1968-1970 | Plymouth | Satellite | Sport |
1970 | Plymouth | Superbird | Base |
1969 | Dodge | Charger | Daytona |
1969 | Dodge | Charger | SE |
1966-1967 | Plymouth | Belvedere II | Base |





Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.