1963-1966 Chevy C10 Short Bed Power Disc Brake Line Conversion Kit CBK0366SS
1963-1966 Chevy C10 Short Bed Power Disc Brake Line Conversion Kit CBK0366SS
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material: Stainless Steel
Power Disc Brake Line Conversion Kit For 1963-66 Chevrolet C10 Short Bed, Stainless. Our Complete Brake line Kits come with every hard line needed for your vehicle. This includes your master cylinder lines, ABS lines (if applicable), Intermediate lines and Your Rear axle lines. See Kit Contents below for exact breakdown of what is in the kit!
All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. Our mild steel lines are galphan coated for added protection.
Our stainless-steel lines are T304 but are of a special softer blend to help with any possible leaks.
Details:
- Application:
- 1963-1966 Chevrolet C10 Pickup
- 1963-1966 GMC 1500 Pickup (C1500)
 
- Dual Master Cylinders
- Front Brake Type: Power Front Disc Brake Conversion
- Rear Brake Type: Rear Drum Brakes
- Bed Size: Short Bed (5.7 ft)
- Drive: 2WD
- Material: T304 Stainless Steel
- Power Front Disc Brake Line Conversion Kit (Front Lower Lines Only)
- NOTE: REQUIRES QPV001/QPV002 Mounted to HBR001 Bracket! This kit also REQUIRES QRI008 Master Cylinder to Valve Lines.
Kit Contents:
- 1x Front Left (Driver) Brake Line
- 1x Front Right (Passenger) Brake Line
- 1x Intermediate Crossover Brake Line
- 2x 3/16" Tube Clamps
- 2x Self-Tapping Screws (5/16-18 x 3/4)
- 1x Brass Union Elbow (1/4" to 1/4")
- 1x Brass Adapter (1/4" male to 3/16" female)
- 1x Front to Rear Brake Line A
- 1x Front to Rear Brake Line B
- 1x Brass Union for Front to Rear Lines A+B
- 1x Rear Left (Driver) Axle Brake Line
- 1x Rear Right (Passenger) Brake Line
Interchange:
- TKT6412SS
- TIN6402SS
- TRA6401SS
 
 
 
 

Policies and FAQs
                    
                    
                      Return Policy
                    
                    
                  
                  Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
                    
                    
                      FAQs
                    
                    
                  
                  |Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
- 
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
- 
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.
 
 
   
   
   
  