Earl's Vapor Guard™ Hose - 761066ERL
Earl's Vapor Guard™ Hose - 761066ERL
Regular price
$62.45 USD
Regular price
Sale price
$62.45 USD
Unit price
per
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
Overview:
Modern fuels are at war with your fuel system. Modern fuels (more than 40 EPA-approved fuel blends in the US alone) include additives that break down traditional rubber hose. This breakdown leads to potentially dangerous leaks & weeping as well as vapors that waste fuel and leave unwanted odors in your shop.
Once fuel lines are degraded, hose particles can contaminate and obstruct fuel injectors and carburetor passages. Earl's Vapor Guard hose and hose ends provide a complete, economical solution that virtually eliminates these fuel permeation issues common with most rubber fuel lines.
The secret to Earl's Vapor Guard hose is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Earl's Vapor Guard™ Barrier is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Earl's Vapor Guard a three way shield against hose deterioration.
Features:
- Multi-layer rubber hose designed to withstand to the corrosive properties of modern fuels
- Multi-fuel compatible: Approved for use with leaded and unleaded Gasoline, Diesel, Biodiesel, E-85, 100% Methanol, ETHANOL and Gasohol fuels
- A two foot section of Earl’s Vapor Guard saves one gallon of gas each year as compared to traditional rubber hose from permeation alone
- Primary Barrier Liner – initial layer offers high resistance to heat and aggressive fuels
- Vapor Guard Barrier – Thermoplastic layer provides superior fuel isolation significantly reducing vapors from escaping through the hose
- Reinforcement braid-aramid material – (EFI hose only) is used to provide the higher pressure rating that is required with fuel injection
- Exterior cover – provides extreme tolerance of heat and ozone
- Choose from carburetor or higher pressure EFI hose
- Hose available in 5/16” and 3/8” sizes
- Not for use in applications where the hose is submersed in fuel
- Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems)
Application:
| Year | Make | Model | Submodel | Engine Size |
|---|---|---|---|---|
| Universal |
Specs:
| Brand | Earls |
|---|---|
| Compatible Hose Ends | Vapor Guard |
| Emission Code | 5 |
| Fluid Type | Bio-Fuels |
| Fluid Type | Coolant |
| Fluid Type | Diesel |
| Fluid Type | E85 |
| Fluid Type | Pump Gas |
| Fluid Type | Race Gas |
| Fluid Type Rating - Bio-Fuels | 4 out of 5 Rating |
| Fluid Type Rating - Coolant | 5 out of 5 Rating |
| Fluid Type Rating - Diesel | 4 out of 5 Rating |
| Fluid Type Rating - E85 | 3 out of 5 Rating |
| Fluid Type Rating - Methanol/Alcohol | 2 out of 5 Rating |
| Fluid Type Rating - Pump Gas | 4 out of 5 Rating |
| Fluid Type Rating - Race Gas | 4 out of 5 Rating |
| Fuel System Type | Carburetor |
| Hose Family | Vapor Guard |
| Hose Length | 10 Feet |
| Hose Size | 44263 |
| Max PSI | 50 |
| Max Vacuum | 10 inHg |
| Min. Bend Radius | 2.5 in. |
| Outside Diameter | .625 in. |
| Product Type | Hose |
| Submersible in Fuel | No |
| Temperature Range | -40° to 257° F |
| Warning | California Proposition 65 |
Policies and FAQs
Return Policy
We accept returns on products within 30 days of delivery. Return shipping is the responsibility of the buyer unless we, the seller, are at fault.
Fault reasons include but are not limited to:
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
The Buyer will not be refunded outbound shipping unless the Seller (Car Part People) is at fault.
In cases where the Buyer purchases and ships the return please note that if the Shipper (ex. USPS, FedEx, UPS, etc.) loses the return we will not be able to offer a refund as the Buyer must contact the Shipper and make a claim.
All products must be returned in original condition, meaning that the product must not be damaged, installed, or missing pieces/parts. If the product is not in original condition a deduction will be issued of up to 50% of the purchase price of the product.
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
When we, the seller, are at fault, please Contact Us for a return label, products returned with a shipping label not provided by the seller will not be refunded to the buyer. Please also note that our return labels are issued with the dimensions and weight of the original shipment, if the product is being returned in any box/package besides the original please contact us with the dimensions and weight.
Returns must be sent to this address:
Car Part People
218 S Lyman St.
Wadsworth, OH 44281
Products returned directly to a manufacturer or the incorrect address may be issued a deduction or denied a refund entirely.
If a product was delivered outside the 30 day return window or is no longer in original condition please contact us as we may be able to issue a refund in store credit and/or with a deduction. If this is the case please Contact Us as these situations are handled on a case by case basis.
If there are any questions, concerns, or doubts about return eligibility please Contact Us and we would be more than happy to assist you.
This policy and page were last updated: July 14th 2023
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.