Center outlet pick-up with -3/8" NPT fitting designed for universal use. 16-108
Center outlet pick-up with -3/8" NPT fitting designed for universal use. 16-108
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
Center outlet pick-up with -3/8" NPT fitting.Fitting location designed for universal use.
The amazing HydraMat? is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.
NOTES: Fitting location designed for unviversal use Designed to fit flat bottom rectangular style fuel cells with minimum dimensions of 8" long and 3" wide For best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat. HydraMats with a female NPT thread do not require the use of a sealing paste or tape. Use of a sealing paste or tape could result in fuel pump failure.
Features:
- HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells
Specs:
| Brand | Holley |
|---|---|
| Color | Beige |
| Emission Code | 5 |
| Fitting Size | 3/8" NPT |
| Grade Type | Performance |
| Length | 8 inches |
| Micron | 15 |
| Product Type | HydraMats |
| Sale Category | Air and Fuel Delivery |
| Screen Micron Rating | 15Micron, Micrometer, Micrometre |
| Warranty | Limited 90 Day |
| Width | 3 inches |
Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.