Aeromotive 13220 EFI to Carb Dual Stage Fuel Pressure Regulator
Aeromotive 13220 EFI to Carb Dual Stage Fuel Pressure Regulator
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Overview:
EFI to Carburetor Regulator.
- EFI to carbureted regulator with 3/8-NPT ports
Aeromotive?s New EFI-2-Carb Dual Stage Fuel Pressure Regulator P/N 13220 allows any car or truck, originally equipped with a return-style EFI powered engine, to affordably convert to a standard carburetor, all while retaining the full, stock, EFI fuel system components? All with a single regulator. With the New EFI-2-Carb Dual Stage regulator, no changes to the original EFI fuel system are required to bolt on a carburetor and go.? Allows use of the stock EFI pump in the tank, the stock EFI supply and return lines, and the stock fuel filter.? This amazing new dual stage pressure regulator provides seamless control of bypass pressure to keep the EFI fuel pump happy while enabling full control of output pressure low enough to feed any off-the-shelf carb. In the first stage, pump bypass pressure is adjustable from 8-16 psi.? In the second stage, pressure to the carburetor is regulated and adjustable from 5-9 psi.? Installation is painless thanks to universal, 3/8? NPT inlet, outlet and return ports.? Two 1/8? NPT gauge ports allow both first stage line pressure and second stage carbureted pressure to be adjusted and monitored.? Ordinary 3/8? NPT to AN, or 3/8? NPT to barb fittings may be used, making plumbing easy to do and the fittings inexpensive. The new EFI-2-Carb Dual Stage regulator from Aeromotive allows you to get an otherwise good car or truck running and back on the road again, easily and affordably.? No need to spend an arm and a leg, or countless hours, diagnosing and/or repairing a complicated, worn out EFI system.? And, no more need to perform a costly redo of the fuel system just to install a carburetor.
Application:
| Year | Make | Model | Submodel | Engine Size |
|---|---|---|---|---|
| Universal |
Specs:
| Outlet Port Diameter (In.) | 0.375 |
|---|---|
| Prop 65 (C, R or CR) | CR |
| Prop 65 Flag | Yes |
Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.