67-76 Chevy GMC Pickup Truck Aluminum Radiator And 14 Inch Fan Kit
67-76 Chevy GMC Pickup Truck Aluminum Radiator And 14 Inch Fan Kit
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
1967-1976 Chevy/GMC Truck Aluminum Performance Radiator and 14 Inch fan kit. For use with 4 core mounting brackets and insulators. Or you can modify 3 core version.
When you need the biggest and best, look no further than the Cold Case Super Duty Line. All Super Duty kits include 2 row radiators with 1.25 Inch tubes, aluminum fan shroud and dual 14 Inch fans, flowing at 2200cfm per fan! For extreme horsepower applications OR if you just want the best of the best...
These COLD-CASE radiators are Tig welded 100 percent aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.
These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.
- 100 percent TIG welded
- Fan Diameter 12 Inch
- All Aluminum
- (2) 1.25 inch Tubes
- Polished OE style tanks
- 16 fins per inch
- Corrugated fins that give more surface area and more thermal transfer
- Pressure tested
- For automatic trans
- Direct fitment for 67-72 GM Truck
- Old Part Number: RPE558ATFK
Radiator Specs
- Core Height 17.25 inch
- Core Width 28.35 inch
- Overall Height 18.6 inch
- Overall Width 34 inch
- Overall Thickness 3 inch
- Tubes (2) 1.25 inch Tubes
- Upper Hose 1.50 inch
- Lower Hose 1.77 inch
- Trans Cooler Fitting: 5/16 Inch Inverted Flare

Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.