•
1 4

1984-1995 Ford F-150 Catalytic Converter - Direct Fit - Federal Flowmaster 20200

1984-1995 Ford F-150 Catalytic Converter - Direct Fit - Federal Flowmaster 20200

2020057-CP

$849.95 USD
$849.95 USD
Sale Sold out
Shipping calculated at checkout.

Estimated Shipping Widget will be displayed here!

Overview:

Flowmaster's new Federal legal direct fit catalytic converter is for the 1984-1995 Ford F-150, F-250 and the 1985-1995 Bronco with the 5.0L engine. This stainless steel unit is a two piece assembly with a mandrel bent Y-pipe and a single converter assembly which connects to the factory exhaust system. Hardware and gaskets are included. This converter meets or s the USEPA standards and includes a 25,000 mile emissions, and 50,000/5 year exterior warranty. Please note: These USEPA Federal converters are not available for sale or use on vehicles licensed or operated in the state of California.

Features:

  • Includes Aluminum Heat Shield and Stainless Steel Clamps
  • Scavenger Series Y-Collector for Maximum Torque Gains
  • Includes Hangers and Hardware for an Easy Installation
  • Mandrel-bent 16-gauge Aluminized Steel Tubing
  • 70 Series Big Block II Performance Muffler
  • Dyno Tuned for Maximum Performance
  • Uses the Factory Hanger Locations
  • Moderate Exterior Exhaust Note
  • Ideal for Towing Applications
  • Quick and Easy Installation

    • Specs:

  • Air Tube Adaptable: No
  • Assembly Length: 12.5
  • Body Height: 3.875
  • Body Length: 12.5
  • Body Width: 7.38
  • Brand: Flowmaster
  • California Air Resources Board (CARB) Certified: No
  • CARB (California) Compliant: No
  • CARB Executive Order Number: Not Applicable
  • Clamps Included: No
  • Converter Quantity: 1
  • Emission Code: 2
  • Finish: Natural
  • Fitment: Direct Fit
  • Grade: Premium Grade
  • Grade Type: Premium Grade
  • Hangers Included: No
  • Heat Shield Attached: Yes
  • Inlet Connection Type: Flanged
  • Inlet Diameter: 2
  • Inlet Gasket Included: No
  • Inlet Inside Diameter: 1.93
  • Inlet Mounting Hardware Included: No
  • Inlet Outside Diameter: 2.06
  • Inlet Quantity: 2
  • Inlet Type: Flanged
  • Material: Stainless Steel
  • Mounting Hardware Included: No
  • Outlet Connection Type: Clamp On
  • Outlet Diameter: 2.25
  • Outlet Inside Diameter: 2.12
  • Outlet Mounting Hardware Included: No
  • Outlet Orientation: Straight
  • Outlet Outside Diameter: 2.25
  • Outlet Quantity: 1
  • Outlet Type: Non-Flanged
  • Oxygen Sensor Location: Pre Catalyst
  • Sensor Port Count: 1
  • Substrate Material: Ceramic
  • Tube Material: 409 Stainless Steel
  • Universal Or Specific Fit: Specific Fit
  • Part Number: 2020057

    • Applications:

    • 1985-1995 Ford Bronco 302 CID
    • 1984-1995 Ford F-150 302 CID
    • 1984-1995 Ford F-250 302 CID

    Emissions:

    • This part is legal for sale and use on Emissions Controlled Vehicles when used in accordance with the manufacturers application guide because it is a direct or consolidated replacement part.
    • The following vehicles are considered Emissions Controlled Vehicles:
      • 1966 and newer U.S. manufactured California Certified vehicles
      • 1968 and newer U.S. manufactured Federally Certified vehicles
      • 1968 and newer Foreign manufactured vehicle
    View full details

    Policies and FAQs

    Return Policy

    We accept returns on products within 30 days of delivery. Return shipping is the responsibility of the buyer unless we, the seller, are at fault.

    Fault reasons include but are not limited to:
    • Buyer was shipped the wrong product
    • Buyer was shipped a damaged product
    • The product page had incorrect fitment and the part does not fit the Buyer's vehicle

    The Buyer will not be refunded outbound shipping unless the Seller (Car Part People) is at fault.
     

    In cases where the Buyer purchases and ships the return please note that if the Shipper (ex. USPS, FedEx, UPS, etc.) loses the return we will not be able to offer a refund as the Buyer must contact the Shipper and make a claim.
     

    All products must be returned in original condition, meaning that the product must not be damaged, installed, or missing pieces/parts. If the product is not in original condition a deduction will be issued of up to 50% of the purchase price of the product.
     
    Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
     

    When we, the seller, are at fault, please Contact Us for a return label, products returned with a shipping label not provided by the seller will not be refunded to the buyer. Please also note that our return labels are issued with the dimensions and weight of the original shipment, if the product is being returned in any box/package besides the original please contact us with the dimensions and weight.
     

    Returns must be sent to this address:
    Car Part People
    218 S Lyman St.
    Wadsworth, OH 44281
     

    Products returned directly to a manufacturer or the incorrect address may be issued a deduction or denied a refund entirely.
     

    If a product was delivered outside the 30 day return window or is no longer in original condition please contact us as we may be able to issue a refund in store credit and/or with a deduction. If this is the case please Contact Us as these situations are handled on a case by case basis.
     

    If there are any questions, concerns, or doubts about return eligibility please Contact Us and we would be more than happy to assist you.
     
    This policy and page were last updated: July 14th 2023

    FAQs

    |Q. What is an Intermediate Brake Line?

    |A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to  a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines. 

    |Q. What is included in a pre bent brake line kit?

    |A. Our kits include all of the solid metal lines for that section of the vehicle

    |Q. I need to return something -  what's your return policy?

    |A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.

    • Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.

    • If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly. 

    |Q. I live in the area. Can I come and pick up parts?

    |A. Yes but you will need to order in advance. All of our items are not stocked at our location. So please place your order online and we will notify you when it is ready for pick up.

    |Q. Do you sell just one line from a kit? 

    |A. Unfortunately we cannot offer single lines outside of kits

    |Q. Do your parts have a guarantee?

    |A. Yes all are covered by the manufactures standard warranty's. Most warranties cover the cost of parts. Any installation or other fees are non-refundable.

    |Q. Can I pay with a check, money order, or cash?

    |A. Online we accept PayPal and all major Credit Cards. If your are picking an item up we gladly accept cash. 

    |Q. Can I have this item shipped to someone other than myself?

    |A. We can only ship to your confirmed address in PayPal or your billing address if you pay with a credit card. 

    |Q. How long will it take for my order to arrive?

    |A. Orders typically Arrive within 3 to 10 days depending if it is a stocked item or something  we have manufactured at time of sale. 

    |Q. I need a part for my car that you don't have listed. Can I special order one

    |A. Yes please send us a message through our custom orders page. 

    |Q. Will you ship the part to anywhere in the world?

    |A. Yes, but items sent out of the continental U.S. may incur additional charges based on their destination. 

    |Q. How do I determine left or right of my vehicle?

    |A. The left and right sides on a vehicle are determined as though you were sitting in the driver's seat. The left is the driver's side, and the right is the passenger's side.

    |Q. I just got my tracking number and there's no info!

    |A. Check it again tomorrow. It takes up to 1 day for the carrier to give status and a delivery date. UPS and FedEx provide delivery dates, USPS usually does not but they take no longer than 5 business days.

    |Q. Do you ship to APO or FPO addresses?

    |A. Yes! Thank you for your military service!

    Still have a question or concern?  Please Contact Us!