1981-89 Jaguar XJS Univ Catalytic Converter 5.3L V12 CA Pre-OBDII 337304 Magnaflow
1981-89 Jaguar XJS Univ Catalytic Converter 5.3L V12 CA Pre-OBDII 337304 Magnaflow
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
Overview:
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 337304. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1992-1993 Toyota Camry, 1980-1986 Ford Mustang, and additional vehicles. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to be certified by CARB for legal use in CA/CARB restricted states for the listed vehicles.
CARB Executive Order: D-193-102
NOTE: This is a UNIVERSAL Converter, so cutting and welding WILL be required for installation!
Application:
-
For AMC Models:
- 1980-1982 Concord, 2.5L L4, Front
- 1978 Gremlin, 2.0L L4, Front
- 1981-1982 Spirit, 2.5L L4, Front
-
For Chrysler Models:
- 1987-1988 Conquest, 2.6L L4, Front
- 1979 Cordoba, 5.2L V8, Front Left
- 1981-1983 Cordoba, 5.2L V8. Front Left
- 1980-1983 Cordoba, 5..2L V8, Front Right
- 1980-1983 Cordoba, 3.7L L6, Front
- 1984-1988 Fifth Avenue, 5.2L V8, Front Left
- 1983 Fifth Avenue, 5.2L V8, Front Right
- 1989 Fifth Avenue, 5.2L V8, Front Right
- 1981-1983 Imperial, 5.2L V8, Front Left
- 1980 LeBaron, 3.7L L6, Front
- 1980-1981 LeBaron, 5.2L V8, Front Left
-
For Jaguar Models:
- 1975-1976 XJ6, 4.2L L6, Front
- 1978-1979 XJ6, 4.2L L6, Front
- 1990-1992 XJ6, 4.0L L6, Front
- 1981-1985 XJS, 5.3L V12, Front
- 1987-1989 XJS, 5.3L V12, Front
-
For Toyota Models:
- 1992-1993 Camry, 2.2L L4, Front
- 1979-1980 Celica, 2.6L L6, Front
- 1981 Celica, 2.8L L6, Front
- 1981-1982 Corolla, 1.8L L4, Front
- 1981-1982 Cressida, 2.8L L6, Front
- 1991-1995 MR2, 2.0L L4 OR 2.2L L4, Front
- 1983-1984 Starlet, 1.3L L4, Front
- 1987-1995 Supra, 3.0L L6 Turbo, Front
Specs:
Air Tube Adaptable | No |
---|---|
Body Height | 4 in |
Body Length | 8 in |
Body Material | Stainless Steel |
Body Shape | Round |
Body Type | Spun |
Body Width | 4 in |
Finish | Stainless Steel |
Heat Shield Attached | No |
Inlet Attachment | Weld-On |
Inlet Diameter | 2 in |
Inlet Orientation | Straight |
Inlet Quantity | 1 |
Material | Stainless Steel |
Outlet Attachment | Weld-On |
Outlet Diameter | 2 in |
Outlet Orientation | Straight |
Outlet Quantity | 1 |
Overall Length | 9.25 in |
Oxygen Sensor Location | None |
Sensor Port Count | 0 |
Substrate Material | Ceramic |
Type | Universal |
Series | California |
CARB EO Number | D-193-102 |
Part Number | 337304 |


















Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.