1967 Dodge Charger Complete Brake Line and Hose Kit Standard Drum Brakes BLH102SS
1967 Dodge Charger Complete Brake Line and Hose Kit Standard Drum Brakes BLH102SS
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material: Stainless Steel
Overview:
Complete Brake Line and Hose Kit for 67 Mopar B-Body, Standard Drum Brakes, Right Front to Fender then Rises 4.5'' Above Bell housing then routes UNDER Frame Rail, 8 3/4 Axle; Stainless - BLH102SS.
Our Complete Brake Line and Hose Kits come with every metal line needed for your vehicle. This includes your Master Cylinder Lines, ABS Lines (if applicable), Front to Rear Lines, and Rear Axle Lines. This kit will also include all of the Front Brake Hoses, Rear Brake Hoses, and Rear Drop Hoses where applicable. Check the Kit Contents section below for an exact breakdown of what comes in your kit!
All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously.
Our mild steel lines are galphan coated for added protection. Our stainless steel lines are T304 but are of a special softer blend to help with any possible leaks.
Details:
- Applications:
- 1967 Dodge Charger
- 1967 Dodge Coronet
- 1967 Plymouth Belvedere
- 1967 Plymouth Belvedere II
- 1967 Plymouth GTX
- 1967 Plymouth Satellite
- Brake Type: Standard/Manual Front Drum Brakes
- Rear Axle Type: 8-3/4 inch Rear Axle
- Type 5 Passenger Front Brake Line, See Figure 1!
- Valve Option Type A, See Figure 2!
- Material: Stainless Steel
- Finish: Uncoated
- Complete Brake Line and Hose Kit
- NOTE: If the fitment on your B Body does not match this kit, please Contact Us about our Fitment Guide!
Kit Contents:
- 1x Master Cylinder Brake Line A
- 1x Master Cylinder Brake Line B
- 1x 'S' Clip
- 1x Front Left (Driver) Brake Line
- 1x Front Right (Passenger) Brake Line
- 1x Front to Rear Brake Line
- 1x Rear Left (Driver) Brake Line
- 1x Rear Right (Passenger) Brake Line
- 2x Front Brake Hoses (Braided Stainless)
- 2x Front Brake Hose Retainers
- 1x Rear Brake Hose (Braided Stainless)
- 1x Rear Brake Hose Retainer
- Total: 7x Brake Lines, 3x Brake Hoses, 1x S Clip, and 3x Hose Retainers
Interchange:
- RKT6703SS
- RMC6701SS
- RFB6801SS
- RFB6806SS
- RIN6802SS
- RRA6801SS
- HSP4015SS
- HSP1225SS












Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.