1967-75 Dodge Dart Front Brake Line Kit Power Disc Brake Conversion Steel YKT6712OM
1967-75 Dodge Dart Front Brake Line Kit Power Disc Brake Conversion Steel YKT6712OM
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Front Brake Line Kit For 67-75 Mopar A Body Power Disc Brake Conversion Kit Steel - YKT6712OM.
Our Front Brake Line Kits include your master cylinder lines and your lines going to your left and right front wheels. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously.
This kit is intended to convert your A body from Standard/Manual to Power Disc Brakes using a Mopar Master Cylinder
Our mild steel lines are galphan coated for added protection. Our stainless-steel lines are T304 but are of a special softer blend to help with any possible leaks.
Details:
- Applications:
- 1967-1975 Dodge Dart
- 1967-1969 Plymouth Barracuda
- 1970-1975 Plymouth Duster
- 1971-1975 Plymouth Scamp
- 1967-1975 Plymouth Valiant
- Brake Type: Power Disc Brake Conversion using Mopar Master Cylinder and a QPV001 or QPV002 Combination Valve!
- Material: Steel
- Location: Front
- Finish: Galfan Coated
- Diameter: 3/16 inch
- Front Brake Line Kit
- NOTE: This kit is NOT intended for replacing the lines of vehicles equipped with Factory Power Disc Brakes! If you have factory brakes please Contact Us about our Fitment Guide!
Kit Contents:
- 1x Master Cylinder Brake Line A
- 1x Master Cylinder Brake Line B
- 1x Front Left (Driver) Brake Line
- 1x Front Right (Passenger) Brake Line
- 1x 3/16 Female to 9/16 Male Brass Adapter
Interchange:
- YMC6712OM
- YFB6711OM
- YFB6712OM

Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.