16-pulse-generator-sn16
16-pulse-generator-sn16
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Material:
Overview:
Classic Instruments 16 Pulse Generator
16 Pulse Generator
The superior coil resistance of the Classic Pulse Signal Generator delivers a clean, sharp pulse. These Generators are available with a choice of fittings to connect directly to most metric, GMC, Ford (from the early torque-tube type speedometer drives to the latest electronic automatic overdrives), and some Chrysler transmissions.
"If you plan on using an early Ford-O-Matic, please contact Classic Instruments for speedometer sending unit options. Early Ford-O-Matics have a specific speedometer cable connection that requires a separate special adapter.
Some Mopar transmissions do not have a speedometer cable output. If you plan on using a Mopar transmission, check the rear of the transmission for a speedometer cable connection where a standard sending unit will thread on. If none is present, please contact our tech department for other speedometer sender options."
Porsche or VW with front-hub cable drive will use a 48" flexible cable and the Classic remote-sensor (the type of cable tip required to fit VW-Porsche will be similar to that shown in Photo 1 below and labeled "VW-Type").
The image above shows the Ford-type Speed Sensor that can be used on most Ford transmission since the mid-60's.
It is designed to plug directly into most C4-C6, Mustang, Cobra, and other similar transmissions having a plug-in hole.
This unit will generate the 16-pulse per revolution ( 16,000 pulses per mile ) signal required to correctly operate your Classic Speedometer.
Specs:
Application | Universal |
---|---|
Bezel Included | No |
Brand | Classic Instruments |
Emission Code | 6 |
Finish | Zinc |
Product Type | 16 Pulse Generator |
Warning | California Proposition 65 |

Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.