2000-2011 Chevrolet Impala Rack & Pinion Line Set Steel APS0001OM
2000-2011 Chevrolet Impala Rack & Pinion Line Set Steel APS0001OM
Couldn't load pickup availability
Estimated Shipping Widget will be displayed here!
Overview:
Rack and Pinion Lines for 2nd/3rd GM W Body, Steel - APS0001OM
Our Power Steering Line Kits come with every metal line needed for your rack and pinion. This typically includes the left and right tubes. Check the Kit Contents section below for an exact breakdown of what comes in your kit!
All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously.
Our mild steel lines are galphan coated for added protection. Our stainless steel lines are T304 but are of a special softer blend to help with any possible leaks.
Details:
- Applications:
- 2005-2009 Buick Allure with 3.8L V6 Engine.
- 1998-2005 Buick Century
- 2005-2009 Buick LaCrosse with 3.8L V6 Engine.
- 1998-2004 Buick Regal
- 2000-2011 Chevrolet Impala
- 1997-2001 Chevrolet Lumina
- 1997-2007 Chevrolet Monte Carlo
- 1997-2008 Pontiac Grand Prix with 3.1L V6 or 3.8L V6 Engine.
- Does NOT fit vehicles with Magnasteer / Variable Effort Steering! (No RPO Code NV7)
- Material: Steel
- Finish: Galfan Coated
- Rack and Pinion Line Kit
Installation Notes:
- Your factory power steering rack lines may thread into an elbow fitting which threads into the rack. These lines require removing the elbow and threading the new line directly into the rack.
Kit Contents:
- 1x Power Steering Cylinder Line (Short)
- 1x Power Steering Cylinder Line (Long)
- 1x Power Steering Breather/Vent Tube
- 2x O-Rings (#901)
Interchange:
- OEM - 26065126
- OEM - 26055484

Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.